SYS Electromac is a table fan OEM manufacturer in Hyderabad, India, building 400 mm PP-body table fans for brands that sell under their own name. Four body styles, six motor options and up to eleven standard colours come off the same three conveyorized lines as our pedestal, wall and ventilation ranges, in a 100,000 sq. ft. plant at IDA Bollaram.
Table fan models
Six motor and blade options on one body
Breezer, Dark Knight, Fantasy and Rainbow all take the same six motor-and-blade combinations. The body decides how the fan looks on a shelf; the motor decides where it sits on a price list. Choosing them separately is how a buyer gets an opening price point and a step-up SKU out of one tool.
| Option | Blade | Sweep | Air delivery | Power | Speed | Service value |
|---|---|---|---|---|---|---|
| Normal speed (economy) | 3-blade PP petal | 400 mm | 70 m³/min | 60 W | 1,330 RPM | 1.17 |
| Normal speed (premium) | 3-blade PP petal, high angle | 385 mm | 78 m³/min | 60 W | 1,330 RPM | 1.30 |
| High speed | 3-blade PP high-speed | 385 mm | 90 m³/min | 130 W | 2,300 RPM | 0.69 |
| Normal speed (5 leaf) | 5-blade PP | 400 mm | 75 m³/min | 65 W | 1,350 RPM | 1.15 |
| Normal speed (metal) | 3-blade metal, embossed | 400 mm | 80 m³/min | 70 W | 1,350 RPM | 1.14 |
| High speed (metal) | 4-blade metal high-speed | 400 mm | 90 m³/min | 120 W | 2,350 RPM | 0.75 |
Standard specification
| Body | PP (polypropylene) |
| Sweep | 400 mm (16″) |
| Speed settings | 3 |
| Oscillation | Yes |
| Rated supply | 230 V, 50 Hz |
| Motor winding | Copper or aluminium, to the buyer’s specification |
| Warranty | 24 months |
| Applicable standard | IS 302 (Part 2/Sec 80) |
Printable spec sheets for all four models are on the downloads page.
Winding, colour and finish
Motor winding is copper or aluminium, to your specification. Copper runs cooler and holds efficiency over a long duty cycle; aluminium brings the landed cost down for entry price points and volume tenders. You specify it, we do not substitute it, and it is confirmed on the despatch documents.
Colour sets run to eleven on the Breezer and Rainbow bodies (black, blue, green, grey, maroon, orange, purple, red, violet, white, yellow) and three or four on Fantasy and Dark Knight. A colour outside the set is a masterbatch change rather than a tooling change, so it is usually available at volume. Two-tone finishes are standard on the Breezer body. Body shape itself is tooling — we hold our standard tools in-house and cut new ones through the ODM route.
OEM and private-label supply
- You provide: brand marks and carton artwork, the motor option and winding, colour reference, and market-specific requirements.
- We provide: tooling where a new body is needed, pre-production samples, an N-10 pilot batch for sign-off, then mass production and packing to your artwork.
- You receive: finished, packed, saleable stock under your brand.
If you are taking an existing model rather than starting a new design, there is no tooling step and no development cycle: we go straight to the N-10 pilot batch, typically within seven days of techno-commercial agreement on the product.
We have supplied table, wall and pedestal programmes to V-Guard, Usha, GM Elektra, RR Kabel, Khaitan, Venus and Luker. Tooling cut for a customer’s exclusive design is used only for that customer.
Commercial terms
- Minimum order: from 500 pieces per model.
- Standard lead time: three weeks from confirmed PO and artwork. New tooling is quoted separately and up front.
- Domestic supply: ex-works Hyderabad or delivered to your depot.
- Export supply: FOB or CIF, regularly to Nepal, Sri Lanka, the Middle East and Africa.
Quality and standards
Table fans are built to IS 302 (Part 2/Sec 80) in an ISO 9001:2015 certified facility, carry a 24-month warranty, and every motor is tested online before dispatch — 100 per cent, not by sample.
Frequently asked questions
What size table fans do you manufacture?
400 mm (16″) across all four bodies. The 385 mm figure against two of the motor options is a blade-geometry difference on the same body, not a different size.
Are your table fans oscillating?
Yes, all four models are three-speed and oscillating as standard.
What is the minimum order quantity?
500 pieces per model. Colours within a model can be split below that, subject to the masterbatch minimum.
Can I run a table fan and a pedestal fan on the same design language?
Yes, and several of our customers do. Breezer, Dark Knight and Rainbow exist as table, wall and pedestal bodies, so one visual identity can carry a three-product range across a season.
Do you supply copper-wound table fans?
Yes. Copper and aluminium are both standard; you specify which, per order.
Do you export table fans?
Yes — Nepal, Sri Lanka, the Middle East and Africa, on FOB or CIF terms, with export cartons and container-ready palletisation.
Get a quotation
Tell us the body, the motor option, the winding and the volume, and we will come back with a price and a delivery date. Request a table fan quotation, or call +91 9177 068 845.